TM 5-3895-385-23-2
0405
Auger Sprocket Assembly Removal -- Continued.
WARNING
Support components when removing/installing the attaching hardware or when component may
fall. Failure to comply may cause injury or death to personnel and damage to equipment.
NOTE
The steps to remove an auger sprocket assembly are the same for both sides of the BMPM.
Right side shown.
1. Remove two bolts (Figure 1, Item 5), lock washers (Figure 1, Item 4), auger bearing cap support (Figure 1,
Item 3), and auger sprocket shaft (Figure 1, Item 2) from bearing support mounting (Figure 1, Item 1).
0405-3
