TM 5-3895-385-23-2
0373
Main Wiring Harness Removal -- Continued.
Figure 16. Main Wiring Harness Ground Wire.
56. Remove bolt (Figure 16, Item 1), lock washer (Figure 16, Item 5), flat washer (Figure 16, Item 4), and ground
wire (Figure 16, Item 2) from exhaust fan (Figure 16, Item 3). Discard lock washer.
57. Remove main wiring harness from Bituminous Material Paving Machine (BMPM).
END OF TASK
Main Wiring Harness Installation
NOTE
Route main wiring harness as noted in removal.
1. Route main wiring harness onto BMPM.
2. Install ground wire (Figure 16, Item 2), bolt (Figure 16, Item 1), new lock washer (Figure 16, Item 5), and flat
washer (Figure 16, Item 4) onto exhaust fan (Figure 16, Item 3).
