TM 5-3895-385-23-1
0198
Table 1. Left Console Right Joy Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start engine.
3. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of
3) from W1 J31 Pin 1 to W1 J31
4.5 VDC, turn keyless engine
Pin 2 (WP 0451, Vol 3, Figure
switch to the OFF position (TM
6).
5-3895-385-10), and replace left
pedestal wiring harness (WP
0374, Vol 2).
2. If voltage reads below 4.5 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and proceed to next
malfunction.
9. Main wiring harness has an
1. Measure for continuity (WP
1. If continuity is present, proceed
open circuit.
0443, Vol 3) between main
to next test.
wiring harness W1 J2 Pin 8 and
W1 J31 Pin 1 (WP 0451, Vol 3,
Figures 2 and 6).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
2. Measure for continuity (WP
1. If continuity is present, replace
0443, Vol 3) between main
propel controller module ECM
wiring harness W1 J2 Pin 9 and
(WP 0399, Vol 2).
W1 J31 Pin 2 (WP 0451, Vol 3,
Figures 2 and 6).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
END OF WORK PACKAGE
0198-4