TM 5-3895-385-23-1
0198
Table 1. Left Console Right Joy Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If no continuity is present,
replace left joystick wiring
harness (WP 0379, Vol 2).
6. Joystick malfunction.
1. Access joysticks (WP 269, Vol
2).
2. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start engine.
3. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of
3) from between negative and
4.5 Volts Direct Current (VDC),
positive terminals on joystick
turn keyless engine switch to the
(WP 0447, Vol 3, Figure 15).
OFF position (TM 5-3895-385-
10, and replace joystick (WP
0267, Vol 2).
2. If voltage reads below 4.5 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and proceed to next
malfunction.
7. Left joystick wiring harness has
1. Disconnect left joystick wiring
an open circuit.
harness W7 J1 from left pedestal
wiring harness W12 J11 (WP
0451, Vol 3, Figure 30).
2. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start engine.
3. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of
3) from W12 J11 Pin 1 to W12
4.5 VDC, turn keyless engine
J11 Pin 2 (WP 0451, Vol 3,
switch to the OFF position (TM
Figure 30).
5-3895-385-10), and replace left
joystick wiring harness (WP
0379, Vol 2).
2. If voltage reads below 4.5 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and proceed to next
malfunction.
8. Left pedestal wiring harness has
1. Disconnect left pedestal wiring
an open circuit.
harness W12 J2 from main
wiring harness W1 J31 (WP
0451, Vol 3, Figure 6).
0198-3
