TM 5-3895-385-23-1
0190
Table 1. Right Console Lights Keypad Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of 10
3) from W9 J9 Pin 2 to W9 J9
VDC, turn keyless engine switch
Pin 6 (WP 0451, Vol 3, Figure
to the OFF position (TM 5-3895-
26).
385-10), and proceed to
malfunction 5.
2. If voltage reads below 10 VDC,
turn keyless engine switch to
the OFF position (TM 5-3895-
385-10), and proceed to next
test.
8. Disconnect main wiring harness
W1 J32 from right pedestal
wiring harness W9 J6 (WP 0451,
Vol 3, Figure 6).
9. Turn keyless engine switch to
the AUX position, but do not
start engine (TM 5-3895-385-
10).
10.Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of 10
3) from W1 J32 Pin 8 to W1 J32
VDC, turn keyless engine switch
Pin 10 (WP 0451, Vol 3, Figure
to the OFF position (TM 5-3895-
6).
385-10), and replace right
pedestal wiring harness (WP
0375, Vol 2).
2. If voltage reads below 10 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and proceed to next
malfunction.
3. Main wiring harness has an
1. Measure for continuity (WP
1. If continuity is present, proceed
open circuit.
0443, Vol 3) between main
to next test.
wiring harness W1 J32 Pin 10
and a known good ground (WP
0451, Vol 3, Figure 6).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
0190-3
