TM 5-3895-385-23-1
0154
Table 1. Screed Crown Fails to Crown Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Start BMPM engine (TM 5-3895-
385-10).
4. Check hydraulic pressure at
1. If hydraulic pressure reads a
hydraulic fitting PCB on the main
minimum of 1800 psi (12,410
hydraulic manifold (WP 0441,
kPa), turn keyless engine switch
Vol 3) while pressing power
to the OFF position (TM 5-3895-
crown up key on screed control.
385-10), and replace screed
crown motor (WP 0256, Vol 2).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and replace screed crown up
Vol 2).
END OF WORK PACKAGE
0154-4