TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#652, FMI#7 ― INJECTOR SOLENOID DRIVER CYLINDER 2 -- MECHANICAL SYSTEM NOT
RESPONDING OR OUT OF ADJUSTMENT
INITIAL SETUP:
Test Equipment
References ― Continued
Fuel injection testing equipment (WP 0440, Vol 3,
WP 0331, Vol 2
Item 62)
WP 0332, Vol 2
Tools and Special Tools
WP 0337, Vol 2
Torque wrench (WP 0440, Vol 3, Item 80)
WP 0338, Vol 2
Personnel Required
91L
WP 0357, Vol 2
References
WP 0448, Vol 3
Equipment Conditions
WP 0277, Vol 2
Engine off (TM 5-3895-385-10)
WP 0327, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
TROUBLESHOOTING PROCEDURES
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.
Table 1. SPN#652, FMI#7 ― Injector Solenoid Driver Cylinder 2 -- Mechanical System Not Responding
Properly or Out of Adjustment.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Fault in the fuel system.
1. Install fuse box (WP 0277, Vol
2).
2. Connect battery cables (WP
0357, Vol 2).
3. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start engine.
Wait 30 seconds.
4. Check active engine faults
1. If fault codes other than
screen for multiple fault codes
SPN#652, FMI#7 are displayed,
other than SPN#652, FMI#7.
turn keyless engine switch to
the OFF position (TM 5-3895-
385-10), and troubleshoot fault
codes.
