TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#645, FMI#5 ― HIGH RESISTANCE OR NO CURRENT AT NUMBER FOUR INJECTOR DRIVER OR
RETURN PIN
INITIAL SETUP:
Test Equipment
References ― Continued
Multimeter (WP 0440, Vol 3, Item 37)
WP 0345, Vol 2
Personnel Required
WP 0357, Vol 2
91L
WP 0443, Vol 3
References
WP 0448, Vol 3
WP 0277, Vol 2
WP 0451, Vol 3
WP 0327, Vol 2
Equipment Conditions
WP 0332, Vol 2
Engine off (TM 5-3895-385-10)
WP 0334, Vol 2
Engine cool
WP 0338, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
TROUBLESHOOTING PROCEDURE
WARNING
Injector solenoids contain high voltage when engine is operating. Do not wear jewelry or damp
clothing when working around injector solenoids. Do not touch injector solenoids or solenoid
wires when engine is operating. Failure to comply may cause injury or death to personnel.
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control
Module (ECM). Failure to comply may cause damage to equipment.
Use correct probes or leads when testing harness connectors. The leads must fit tightly
inside the connector without expanding the pins in the connector. Failure to comply may
cause damage to equipment.
