TM 5-3895-385-23-1
0032
Table 1. SPN#110, FMI#16 ― Engine Coolant Temperature Above
Engine Protection Warning Limit -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If not damaged, restore
equipment to original condition,
and proceed to next
malfunction.
15.Check for multiple fault codes.
1. Turn BATTERY DISCONNECT
switch to OFF position (TM 5-
3895-385-10) and wait for 5
seconds.
2. Turn BATTERY DISCONNECT
switch to ON position (TM 5-
3895-385-10).
3. Start engine (TM 5-3895-385-10)
and let it idle until reaching
operating temperature.
4. Check active engine faults
1. If fault code SPN#110, FMI#16
screen for fault code SPN#110,
is displayed, proceed to next
FMI#16.
test.
2. If fault code SPN#110, FMI#16
is not displayed, turn keyless
engine switch to the OFF
position (TM 5-3895-385-10).
No fault present; restore
equipment to original condition.
5. Check active engine faults
1. If any other fault code is
screen for any other active fault
displayed, proceed to the
codes.
appropriate troubleshooting
procedure.
2. If no other fault codes are
displayed, turn keyless engine
switch to the OFF position (TM
5-3895-385-10). It is possible
that another fault exists or that
another troubleshooting
procedure applies. If this was
the first time through the task,
restore equipment to original
condition, and restart
troubleshooting at malfunction
1.
0032-7
