TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#110, FMI#16 ― ENGINE COOLANT TEMPERATURE ABOVE ENGINE PROTECTION WARNING LIMIT
INITIAL SETUP:
Test Equipment
References ― Continued
Electrolyte and antifreeze tester (WP 0440, Vol 3,
WP 0349, Vol 2
Item 60)
WP 0357, Vol 2
Multimeter (WP 0440, Vol 3, Items 36 and 37)
WP 0364, Vol 2
Radiator testing kit (WP 0440, Vol 3, Item 63)
WP 0365, Vol 2
Personnel Required
WP 0366, Vol 2
91L
WP 0367, Vol 2
References
WP 0277, Vol 2
WP 0368, Vol 2
WP 0323, Vol 2
WP 0443, Vol 3
WP 0333, Vol 2
WP 0448, Vol 3
WP 0334, Vol 2
WP 0451, Vol 3
WP 0343, Vol 2
Equipment Conditions
Engine off (TM 5-3895-385-10)
WP 0344, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
TROUBLESHOOTING PROCEDURES
WARNING
Engine cooling system operates at high temperature and pressure. Contact with high-
pressure steam and/or liquids can cause burns and scalding. Shut down Bituminous Material
Paving Machine (BMPM) engine and allow it to cool before performing checks, services, or
maintenance. Wear gloves, protective clothing, and goggles as required. Do not open
radiator cap unless coolant temperature is below 100F (38C). Failure to comply may cause
injury or death to personnel.
Engine coolant is toxic to eyes and poisonous if ingested. Eye protection is required when
working with engine coolant. Avoid repeated or prolonged contact. Failure to comply may
cause injury or death to personnel.
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.