TM 5-3895-385-10
0018
Check Double Hydraulic Pump Drive Lubricating Oil Level
WARNING
Hot oil can be thrown when engine is running. Stop engine before checking lubricating oil
level. Failure to comply may cause injury or death to personnel.
When running, BMPM engine has hot metal surfaces that will burn flesh on contact. Shut
down engine and allow sufficient cooling before checks, services, or maintenance. Wear
gloves and additional protective clothing as required. Failure to comply may cause injury or
death to personnel.
Metal jewelry can become entangled in equipment components. Remove all jewelry and do
not wear loose clothing when working on equipment. Failure to comply may cause injury or
death to personnel.
NOTE
Double hydraulic pump drive lubricating oil level should be checked using the dipstick while
the engine is turned off and before beginning any paving operation.
Capture and dispose of spilled lubricating oil IAW local SOP.
Access to a key will be needed if the engine cover latches are locked.
1. Press buttons on three engine cover latches (Figure 5, Item 1) on front of engine cover (Figure 5, Item 4) to
release latches.
WARNING
BMPM engine cover is heavy. Support engine cover carefully when opening or closing. Open
engine cover completely when accessing or working on engine. Failure to comply may cause
injury or death to personnel.
2. Raise BMPM engine cover (Figure 5, Item 4).
