TM 5-3895-385-10
0004
Right Screed Control Auger/Conveyor Controls -- Continued.
Table 20. Right Screed Control Auger/Conveyor Keypad -- Continued.
KEY
CONTROL/INDICATOR
FUNCTION
4
Right Conveyor Speed Up
Pressing and holding key will cause right conveyor speed to increase.
LEDs are used in conjunction with right conveyor speed down key
LEDs (Figure 20, Item 5). The number of illuminated LEDs across both
keys indicates speed (more LEDs illuminated indicates higher speed).
5
Right Conveyor Speed Down
Pressing and holding key will cause right conveyor speed to decrease.
LEDs are used in conjunction with right conveyor speed up key LEDs
(Figure 20, Item 4). The number of illuminated LEDs across both keys
indicates speed (more LEDs illuminated indicates higher speed).
6
Reverse Auger/Conveyor
Pressing and holding key will cause both right and left conveyors and
augers to reverse slowly (unless auger bypass function is engaged,
then only conveyors will reverse).
Top LED will be illuminated when function is active.
7
Auger Bypass
Pressing key will turn off augers.
Top LED will illuminate when auger bypass is active (augers will be off).
Pressing key again will turn off function and turn off LED (augers will
resume function).
8
Right Screed Extension
Pressing and holding key will lower right screed extension to slope
Slope Down
down (more angle).
Releasing key will hold extension in position.
Top LED will be illuminated when function is active.
Pressing and holding key will raise right screed extension to slope back
9
Right Screed Extension
toward level (less angle). Releasing key will hold extension in position.
Slope Up
Top LED will be illuminated when function is active.
When right auger/conveyor manual mode is selected, pressing and
10
Right Material Pile Height
holding this key reduces the speed of the right auger and conveyor.
Auger/Conveyor Speed
minus (-)
When right auger/conveyor automatic mode is selected, pressing and
holding this key decreases the right material pile height controlled with
the use of the sonic auger sensors.
Number of illuminated LEDs and frequency of flashing indicates pile
height in automatic or auger/conveyor speed in manual. (More LEDs
illuminated and/or faster flashing indicates higher value.)
11
Right Conveyor Bypass
Pressing key will turn off right conveyor.
Top LED will be illuminated when right conveyor bypass is active (right
conveyor will be off). Pressing key again will turn off bypass and turn off
LED (conveyor will resume function).
0004-33
