TM 5-3895-373-34
2.17
DIESEL ENGINE REPAIR - Continued.
D.
REPAIR - Continued.
CAMSHAFT THRUST WASHER
Type...................................................................................................................................................................... 360O
Outside diameter ..............................................................................................2.872 to 2.874 in.(72,95 to 73,00 mm)
Inside diameter...............................................................................................................................1.75 in.(44,45 mm)
Thickness .............................................................................................................0.216 to 0.218 in.(5,47 to 5,54 mm)
Engine block recess diameter for thrust washer ..............................................2.875 to 2.885 in.(73,03 to 73,28 mm)
Engine block recess depth for thrust washer .......................................................0.215 to 0.218 in.(5,46 to 5,33 mm)
Thrust washer protrusion beyond engine block front face ...................................0.026 to 0.031 in.(0,66 to 0,79 mm)
Clearance fit of thrust washer in recess .............................................................0.001 to 0.0013 in.(0,03 to 0,33 mm)
Thrust washer relationship to engine block front face................................... -0.002 to +0.003 in.(-0,05 to +0,07 mm)
Camshaft end float ...............................................................................................0.004 to 0.016 in.(0,10 to 0,41 mm)
CYLINDER HEAD ASSEMBLY
Skimming allowance on cylinder head assembly face ...................................................................0.012 in.(0,30 mm)
Minimum cylinder head assembly depth after skimming..........................................................4.0355 in.(102,51 mm)
Maximum nozzle protrusion after skimming ...................................................................................0.175 in.(4,44 mm)
Leak test pressure................................................................................................30 lbf/in.2 (2,11 kgf/cm2) (206 kNm)
Valve seat insert angle ........................................................................................................................................... 45O
Valve seat insert angle (intake) .............................................................................................................................. 30O
Valve bore in cylinder head assembly................................................................. 0.37425 to 0.37525 in.(9,51 to 9,53)
Valve stem guide parent bore diameter .......................................................0.6247 to 0.6257 in.(15,87 to 15,89 mm)
Overall length of valve stem guide (intake) ..................................................................................2.281 in.(57,94 mm)
GO TO NEXT PAGE
2-204
