B. INSTALL - TM-5-3895-373-20

7.16. REPLACE HYDRAULIC OIL TEMPERATURE SENSOR.

7.17. REPLACE DCA AND PRESSURE TRANSMITTERS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
758

TM 5-3895-373-20 7.16. REPLACE HYDRAULIC OIL TEMPERATURE SENSOR - Continued. B. INSTALL. Pipe sealant can cause eye damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes with water and get immediate medical attention. 1. APPLY PIPE SEALANT TO THREADS OF HYDRAULIC OIL TEMPERATURE SENSOR (2). 2. REMOVE PROTECTIVE CAP. 3. INSTALL HYDRAULIC OIL TEMPERATURE SENSOR (2) INTO STRAIGHT ADAPTER (4). 4. INSTALL GAUGE PANEL HARNESS RING TERMINAL (3) ONTO HYDRAULIC OIL TEMPERATURE SENSOR (2). SECURE WITH KNURLED NUT (1). Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. 5. APPLY ELECTRICAL INSULATING VARNISH TO GAUGE PANEL HARNESS RING TERMINAL (3). NOTE FOLLOW-ON-TASK: Close right access door per TM 5-3895-373-10. END OF TASK 7-116

Privacy Statement
Press Release
Contact