B. INSTALL - Continued - TM-5-3895-373-20

7.15. REPLACE ENGINE OIL PRESSURE TRANSMITTER COMPONENTS.

7.16. REPLACE HYDRAULIC OIL TEMPERATURE SENSOR.

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
756

TM 5-3895-373-20 7.15. REPLACE ENGINE OIL PRESSURE TRANSMITTER COMPONENTS- Continued. B. INSTALL - Continued. Pipe sealant and hydraulic fitting sealant can cause eye damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes with water and get immediate medical attention. 2. APPLY PIPE SEALANT TO THREADS OF ELBOW (7). 3. INSTALL ELBOW (7) INTO BRACKET (5). REFER TO ILLUSTRATION. 4. APPLY PIPE SEALANT TO THREADS OF ENGINE OIL PRESSURE TRANSMITTER (6). 5. INSTALL ENGINE OIL PRESSURE TRANSMITTER (6) INTO BRACKET (5). 6. INSTALL BRACKET (5) ON ENGINE AND SECURE WITH HEX HEAD CAP SCREW (4). 7. TIGHTEN CAP SCREW TO 95 LB-FT (122 N•m). 8. APPLY HYDRAULIC FITTING SEALANT TO THREADS OF ELBOW (7). 9. INSTALL HOSE (3) ONTO THREADS OF ELBOW (7). 10. INSTALL ENGINE WIRE HARNESS RING TERMINAL (2) ONTO ENGINE OIL PRESSURE TRANSMITTER (6). SECURE WITH KNURLED NUT (1). Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. 11. ELECTRICAL INSULATING VARNISH TO ENGINE WIRE HARNESS RING TERMINAL (2). NOTE FOLLOW-ON-TASK: Close front top right access door per TM 5-3895-373-10. END OF TASK 7-114

Privacy Statement
Press Release
Contact