TM 5-3895-373-20
B.
CLEAN - Continued.
3.
DRY ALL PARTS WITH A CLEANING CLOTH.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
4.
CLEAN HEX HEAD CAP SCREWS WITH
THREAD LOCKING COMPOUND SOLVENT.
5.
WIPE HEX HEAD CAP SCREWS DRY WITH A
CLEAN, LINT-FREE CLOTH.
C.
INSTALL.
1.
INSTALL SCREED CONTROL BOX, QUICK
DISCONNECT
CONNECTOR,
MOUNTING
PANEL, AND BUSS BAR.
a.
Install screed control box cover lock knob (73)
onto screed control box (72).
b.
Install lockwashers (70) and flat washers (71)
onto hex head cap screws (69).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound to hex head cap
screws (69).
d.
Install screed control box (72) onto paving
machine and secure with hex head cap screws
(69). Tighten hex head cap screws to 9 lb-ft (12
Nm).
GO TO NEXT PAGE
15-11