TM 5-3895-373-20
15.2.
REPLACE SCREED CONTROL BOX - Continued.
NOTE
There is a left hand and a right hand
screed control box on the paving
machine. This procedure refers to
replacement of the left hand screed
control box. Procedure is identical
for right hand screed control box
replacement. Differences between
left hand and right hand screed
control panels are addressed in the
text. Left hand screed control box is
shown in this procedure.
A.
REMOVE.
1.
REMOVE BATTERY CABLES.
a.
Unbuckle battery box holddown straps (1)
and remove battery box covers (2) from
both batteries.
b.
Lift rubber battery terminal caps (3) from
battery terminals.
When disconnecting batteries,
disconnect negative battery cable
before disconnecting positive battery
cable. Failure to disconnect batteries
in the proper sequence may lead to
electrical shock or short circuit and
result in personnel injury.
c.
Remove battery nut (4) and negative
battery cable (5) from negative terminal of
outboard battery.
d.
Remove battery nut (4) and positive
battery cable (6) from positive terminal of
inboard battery.
2.
REMOVE SCREED CONTROL BOX
PROTECTIVE COVER PER TM 5-3895-
373-10.
GO TO NEXT PAGE
15-4
