TM 5-3895-373-10
Table 2-1. Preventive Maintenance Checks and Services for
Bituminous Material Paving Machine - Continued
Location
Item
Item To
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
Conveyor chain -
Place the left auger/conveyor switch (24) in
continued
the down, "MAN" position. Using flashlight,
check the complete length of the conveyor
chain and master links for missing cotter pins
(25) and spring pins (26).
Place the left auger/conveyor switch (24) to
the center, OFF position.
Place the right auger/conveyor switch (24) in
the down, "MAN" position. Check the
complete length of the conveyor chain and
master links for missing cotter pins (25) and
spring pins (26).
Place the right auger/conveyor switch (24) to
the center, OFF position.
Place the ignition switch to the STOP
position and remove ignition key.
2-28
