TM 5-3895-371-24 & P
Section XXIV. MAINTENANCE OF EXTERNAL SMOKE STACKS
2-28. External Smoke Stacks.
a.
b.
c.
NOTE
Removal and Maintenance procedures are identical
for both smoke stacks.
Removal. (Refer to fig. 2-31.)
(1)
Remove two self tapping screws (6) and remove bracket (7) from smoke stacks.
(2)
Remove two hex nuts (8).
(3)
Lift off smoke stack.
Disassembly.
(1)
Remove spring (5) and two cotter pins (4).
(2)
Remove two screws (2).
(3) Remove cover (3).
(4)
Remove three screws (9) and mounting hook (10).
Inspection. Inspect both smoke stack chambers (1) and covers (3) for holes, cracks, and
thin or deteriorated areas. Replace if defective.
d.
Reassembly. (Refer to fig. 2-31.)
(1)
Install cover (3) and secure with screws (2).
(2)
Install two cotter pins (4) and spring (5).
(3)
Install mounting hook (10) and secure with three screws (9).
e.
lnstallation.
(1)
Install smoke stack chamber (1) and secure with hex nuts (8).
(2)
Install bracket (7) and secure with two sheet metal self tapping screws (6).
2-73
