Section VIII. MAINTENANCE OF BELL

Section VII. MAINTENANCE OF STOWAGE BOX - TM-5-3895-371-24P_46

Figure 2-6. Disassemble/Assemble Bell Mechanism - TM-5-3895-371-24P_48

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
31

TM 5-3895-371-24 & P b. Disassembly. Loosen set screw and remove lock arm (7), remove two nuts (6) and capscrews (9) from handle (8) and remove handle. Drill out rivets (13) from hinge (11) and remove hinge from lid (4). C. Assembly. Install hinge (11) to lid (4) with five bolts (12) and nuts (10). Install handle (8) and secure with two nuts (6) and capscrews (9). Install lock arm (7) and tighten set screw. d. Installation. (Refer to fig. 2-4.) (1) Set stowage box (5) on rear frame rails and secure with six capscrews (3). (2) Position lid (4) on stowage box (5) and secure with five capscrews (2). Section VIII. MAINTENANCE OF BELL 2-12. Bell. a. Removal. (Refer to fig. 2-5.) (1) Loosen screw (1) and pull out lanyard (2). LEGEND: 1. SCREW 2. LANYARD 3. CAPSCREW (2) 4. BELL ASSEMBLY 5. STRIKER 6. ACTUATING ARM TA 075809 Figure 2-5. Remove/Install Bell Mechanism and Lanyard. 2-24

Privacy Statement
Press Release
Contact