TM 5-3895-371-24 & P
CHAPTER 7
REPAIR OF SPRAY BAR AIR CYLINDERS
7-1. Disassembly of Bar Shifting Control Cylinder. (Refer to fig. 7-1.)
a.
Remove snap ring at piston end of cylinder; then pull out piston assembly.
b.
Remove two seals from piston assembly.
c.
Remove snap ring at opposite end of cylinder; then remove O-ring.
7-2. Reassembly of Bar Shifting Control Cylinder. (Refer to fig. 7-1.)
a.
Clean cylinder and piston in dry cleaning solvent.
b.
Install new seals and O-ring.
c.
Install piston assembly and secure with snap ring.
d.
Install O-ring at opposite end of cylinder and secure with snap ring.
Figure 1-1. Disassemble/Assemble Bar Shifting Control Cylinder.
7-1
