CHAPTER 66-1. Removal.REPAIR OF HYDRAULIC TANKa .breather (2), gage (3) and sight glass (4) may be removed and replaced. Fitting (8) tee (9) and sensorRemove drain plug (7) from tank (6) and drain fluid below sight glass level (4) Cap (1)unit (10) may be disconnected and replaced. Tank (6) and mounting brackets (5) may be replacedor repaired with welds.b.Remove four nuts (15), lockwashers (14), and hook bolts (12); remove brackets (13 and 11).lockwashers (17), and nuts (18).Remove mounting brackets (5) from brackets (13 and 11) by removing four capscrews (16),Figure 6-1. Disassemble/Reassemble Hydraulic lank.6-1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
