TM 5-3895-371-24 & P
Section V. REPAIR OF HYDRAULIC MOTOR
3-6. Hydraulic Motor.
a.
Removal of Hydraulic Motor. (Refer to fig. 3-58.)
(1)
Remove stowage box. (Refer to para 2-11.)
(2)
Disconnect tachometer cable (5, fig. 3-58).
(3)
Disconnect three hydraulic lines (30, (31), (32) at hydraulic motor (17).
(4)
Remove hydraulic hose (27) from elbow (26) and tee (29).
(5)
Remove override cable clamp (11) by removing attaching capscrew (10), nut (14), and
washer (13); then lift out override cable (9) and position it out of the way for pump removal.’
(6)
Disconnect universal drive by removing eight capscrews (1), nuts and washers (2).
(7)
Remove capscrews (12) with nut (16) and lockwashers (15); then lift out rail (18)
with attached hydraulic motor (17).
(8)
Unscrew two capscrews (6) and washers (8); lift off sprocket cover (7).
(9)
Remove three capscrews (19), lockwashers (21) and nuts (22) that fasten hydraulic
motor (17) to its mounting bracket and separate the motor from the rail (18).
(10)
Slip tachometer drive chain (20) from flange sprocket (23); separate from drive coup-
ling (25).
(11)
Remove drive coupling (25) by removing three each capscrews (24), nuts (3), and lock-
washers (4).
3-49
