TM 5-3695-371-24&P
(2)
Remove two capscrews and washers (6) that fasten the burner assembly to the tank;
then pull out the burner assembly (1) and two tapered spacers located behind the burners.
b.
Installation. (Refer to fig. 2-62.)
(1)
screw hole
Mount burner assembly (1) on tank with a tapered spacer between each mounting cap-
and the tank.
(2)
Secure mounting plate to tank with two capscrews and washers (6).
(3)
Join tubes (3 and 5) together with screws (4) and reconnect fuel line (2).
2-121/2-122(Blank)
