TM 5-3895-385-23-3
0442
HYDRAULIC PRESSURE TESTING -- CONTINUED.
NOTE
Some hydraulic oil will leak out of hoses and hydraulic fittings when disconnecting or connecting
components. Have a drain pan and rags in place to capture hydraulic oil.
Hydraulic Pressure Testing at Test Port
Figure 1. Hydraulic Gauge.
2. Remove cap on test port.
3. Attach hydraulic gauge (Figure 1, Item 2) onto test port.
4. Perform function specified in troubleshooting.
5. Disconnect hydraulic gauge (Figure 1, Item 2) from test port.
6. Install cap onto test port.
END OF TASK