END GATE INSTALLATION -- CONTINUED.
Figure 4. End Gate.
The end gate weighs 168 pounds (lb) (57 kilograms (kg)). Four personnel or a suitable lifting
device is necessary to lift end gate. Failure to comply may cause injury or death to personnel.
Properly support the item being lifted. Failure to comply may cause damage to equipment.
It may be necessary to raise screed slightly in order to slide end gate on or off screed
It may be necessary to adjust the end gate tilt screw post for proper alignment.
3. Install the end gate (Figure 4, Item 1) onto screed extension (Figure 4, Item 2) with assistance.