END GATE REMOVAL -- CONTINUED.
1. Remove two bolts (Figure 1, Item 6), lock washers (Figure 1, Item 7), and screed end gate bracket mount bar
(Figure 1, Item 8) from screed extension (Figure 1, Item 2). Discard lock washers.
2. Remove lock nut (Figure 1, Item 5) from screed extension bolt (Figure 1, Item 3) and end gate depth screw
bracket (Figure 1, Item 4). Discard lock nut.
The end gate weighs 168 pounds (lb) (57 kilograms (kg)). Four personnel or a suitable lifting
device is necessary to lift end gate. Failure to comply may cause injury or death to personnel.
Properly support the item being lifted. Failure to comply may cause damage to equipment.
It may be necessary to raise screed slightly in order to slide end gate on or off screed extension.
3. Remove end gate (Figure 1, Item 1) from screed extension (Figure 1, Item 2) with assistance.