REMOVE - Continued.
REMOVE HYDRAULIC HOSES.
Use of 1-1/2 in. (Item 116, Appendix
D) and 1-1/4 in. (Item 115, Appendix
D) combination wrenches will be
required to perform this procedure.
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Tag and disconnect oil cooler hose (5) from port
Tag and disconnect hydraulic hoses (6 through
8) from port #2, 3, and 4 elbows.
Plug all hydraulic hoses.
GO TO NEXT PAGE