REMOVE - Continued.
REMOVE HYDRAULIC RESERVOIR FILLER
OPENING CAP ASSEMBLY.
Reach down through hole in valve panel (19),
behind stack valve, and unscrew hydraulic
reservoir cap (20). Remove machine screws
Remove filler neck (23) with attached hydraulic
reservoir cap (20).
Remove gasket (24), strainer (25), and gasket
Reuse machine screws (21) that were
removed from the hydraulic reservoir.
Do not use metric screws provided
with replacement filler opening cap
assembly. Use of metric screws will
damage reservoir screw threads.
Discard filler opening cap assembly.
REMOVE HYDRAULIC RESERVOIR.
One hex head cap screw (27) was
loosened during engine removal.
Remove hex head cap screws (27), lockwashers
(28), and flat washers (29) from hydraulic
reservoir (30) mounting brackets. Discard
GO TO NEXT PAGE