REPAIR TOW POINT CYLINDER - Continued.
ASSEMBLE - Continued.
ASSEMBLE PISTON AND CYLINDER.
Remove lint-free cloth from cylinder tube (4).
Ensure no foreign material is present in cylinder
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Lubricate outer sealing surfaces of cylinder cap
(5), cylinder head (3), and piston (8) with clean
Slide piston (8) into cylinder tube (4).
Seat cylinder head (3) flush on cylinder tube (4).
Install cylinder cap (5) in cylinder tube (4). Line
up adapter ports in cylinder cap and cylinder
With cylinder rod extended, install tie rods (1)
and evenly tighten to 20 Ib-ft (27 N.m).
FOLLOW-ON-TASK: Install tow point cylinder per TM 5-3895-373-20.
END OF TASK