TM 5-3895-385-23-2
0224
Screed Removal -- Continued.
1. Remove left and right front screed arms (WP 0230).
2. Disconnect screed raise hydraulic cylinder (Figure 1, Item 2) from screed arm (Figure 1, Item 1) on both left
and right sides by removing bolt (Figure 1, Item 3), lock nut (Figure 1, Item 6), flat washer (Figure 1, Item 5),
and spacer (Figure 1, Item 4) at ball joint. Discard lock nut.
0224-3