TM 5-3895-385-23-1
0219
Table 1. Keyless Engine Switch Malfunction Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If voltage reads below 22 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and replace keyless engine
switch (WP 0268, Vol 2).
3. Turn and hold keyless engine
switch to the ON position (TM 5-
3895-385-10).
4. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of 22
3) post 50 on the keyless engine
VDC, turn keyless engine switch
switch (WP 0447, Vol 3, Figure
to the OFF position (TM 5-3895-
21) and known good ground.
385-10), and replace ignition
switch wiring harness (WP 0383,
Vol 2).
2. If voltage reads below 22 VDC,
turn keyless engine switch to the
OFF position (TM 5-3895-385-
10), and replace keyless engine
switch (WP 0268, Vol 2).
END OF WORK PACKAGE
0219-5/6 blank
