TM 5-3895-385-23-1
0137
Table 1. Left Screed Extension Fails to Retract Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Check hydraulic pressure at
1. If hydraulic pressure reads a
hydraulic fitting LEB on the main
minimum of 1800 psi (12,410
hydraulic manifold (WP 0441,
kPa), turn keyless engine switch
Vol 3) while pressing left
to the OFF position (TM 5-3895-
extension extend key on screed
385-10), and replace screed
control.
extension hydraulic cylinder (WP
0254, Vol 2).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and replace left screed
extension hydraulic solenoid
(WP 0312, Vol 2).
END OF WORK PACKAGE
0137-4
