TM 5-3895-385-23-1
0116
Table 1. Right Tow Fails to Raise Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and replace right tow point
hydraulic solenoid (WP 0312,
Vol 2).
6. Loss of hydraulic pressure.
1. Attach hydraulic pressure tester
(WP 0442, Vol 3) to hydraulic
hose 43B at right tow point
hydraulic cylinder (WP 0281, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press right tow point raise key
on screed control (TM 5-3895-
385-10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose
minimum of 1800 psi (12,410
43B at right tow point hydraulic
kPa), turn keyless engine switch
cylinder (WP 0281, Vol 2) while
to the OFF position (TM 5-3895-
pressing right tow raise key on
385-10), and replace the right
screed control.
tow point hydraulic cylinder (WP
0231, Vol 2).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and replace hydraulic hose 43B
(WP 0281, Vol 2).
END OF WORK PACKAGE
0116-4