TM 5-3895-385-23-1
0075
Table 1. SPN#1326, FMI#31 ― Engine Misfire Cylinder 4 -- Condition Exists -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If fault code SPN#1326, FMI#31
is not displayed, turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
restore equipment to original
condition, and proceed to next
test.
7. Turn BATTERY DISCONNECT
switch to OFF position (TM 5-
3895-385-10) and wait for 5
seconds.
8. Turn BATTERY DISCONNECT
switch to ON position (TM 5-
3895-385-10).
9. Start engine (TM 5-3895-385-
10) and let it idle for 1 minute.
10.Check active engine faults
1. If fault code SPN#1326, FMI#31
screen for fault code
is displayed, turn keyless
SPN#1326, FMI#31.
engine switch to the OFF
position (TM 5-3895-385-10),
and replace cylinder number 4
injector (WP 0338, Vol 2).
2. If fault code is not displayed,
proceed to next test.
11.Check active engine faults
1. If other fault codes are
screen for any other fault code.
displayed, turn keyless engine
switch to the OFF position (TM
5-3895-385-10), and proceed to
displayed fault code
troubleshooting procedure.
2. If no other fault codes are
displayed, turn keyless engine
switch to the OFF position (TM
5-3895-385-10). No fault
present; restore equipment to
original condition.
END OF WORK PACKAGE
0075-3/4 blank