TM 5-3895-373-34
CHAPTER 1
INTRODUCTION
SECTION I. GENERAL INFORMATION
Para
Page
Calibration .............................................................................................................................
1.10
1-2
Corrosion Prevention and Control (CPC) ..............................................................................
1.3
1-1
Destruction of Army Materiel to Prevent Enemy Use ............................................................
1.4
1-2
Maintenance Forms, Records, and Reports .........................................................................
1.2
1-1
Official Nomenclature ............................................................................................................
1.7
1-2
Preparation for Storage or Shipment.....................................................................................
1.9
1-2
Reporting Equipment Improvement Recommendations (EIR) ..............................................
1.5
1-2
Scope ....................................................................................................................................
1.1
1-1
Use of Metric Units ................................................................................................................
1.8
1-2
Warranty Information.............................................................................................................
1.6
1-2
1.1
SCOPE.
a.
Type of Manual: Direct Support and
General Support Maintenance.
b.
Model Number and Equipment Name:
Ingersoll-Rand Company Model 780T Crawler Mounted,
Diesel Engine Driven, Bituminous Material Paving
Machine, NSN 3895-01-379-1102.
c.
Purpose
of
Equipment:
The
Paving
Machine is used to repair and maintain damaged or worn
landing pads, airfields, taxiways, roads, and parking
areas in combat related facilities, as well as new road
construction. The paving machine will also be used to
construct extensions to existing facilities such as roads,
airfields, and taxiways.
1.2
MAINTENANCE FORMS, RECORDS, AND
REPORTS.
Department of the Army forms and procedures used for
equipment maintenance will be those prescribed by DA
PAM 738-750, The Army Maintenance Management
System.
1.3
CORROSION PREVENTION AND CONTROL
(CPC).
Corrosion Prevention and Control (CPC) of Army
materiel is a continuing concern. It is important that any
corrosion problem be reported so the problem can be
corrected and improvements can be made to prevent the
problem in the future.
While corrosion is typically associated with the rusting of
metals, it also includes the deterioration of other
materials, such as rubber and plastic. Unusual cracking,
softening, swelling or breaking of these materials may
indicate a corrosion problem.
If a corrosion problem is identified, report it using an SF
368, Product Quality Deficiency Report. Completed
forms should be submitted to the address specified in
DA PAM 738-750. Use of key words such as
"corrosion", "rust", "deterioration" and "cracking" will
ensure the information is identified as a CPC problem.
1-1
