TM 5-3895-373-34
2.53
REPLACE/REPAIR HYDRAULIC RESERVOIR COMPONENTS - Continued.
A.
REMOVE - Continued.
7.
REMOVE ELBOWS AND PLUGS.
NOTE
Perform
the
following
removal
procedures only as needed to replace
damaged components.
Use of 1-1/2 in. (Item 116, Appendix
D) and 1-1/4 in. (Item 115, Appendix
D) combination wrenches will be
required to perform this procedure.
a.
Tag and remove elbows (33 through 37) from
reservoir ports #3, 4, 6, 7, and 9.
b.
Tag and remove elbow (38) with attached tee
(39) from reservoir port #8.
c.
Remove plug (40) from reservoir port #5.
d.
Remove elbow (41), pipe coupling (42), and
elbow (43) at reservoir port #2.
e.
Remove elbow (44), check valve (45), and elbow
(46) at reservoir port #1.
f.
Remove plugs (47).
GO TO NEXT PAGE
2-706
