TM 5-3895-373-34
A.
REMOVE - Continued.
2.
REMOVE HYDRAULIC FITTINGS FROM
AUXILIARY PUMP.
WARNING
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
NOTE
On right auxiliary pump, an elbow will
be removed in place of straight
adapter (4).
a.
Using combination wrench, remove straight
adapter (4) and preformed packing (5). Discard
preformed packing.
b.
Remove straight adapter (6) and preformed
packing (7). Discard preformed packing.
c.
Remove straight adapter (8) and preformed
packing (9). Discard preformed packing.
d.
Remove cap screws (10), lockwashers (11),
port adapter (12), and gasket (13). Discard
lockwashers and port adapter gasket.
e.
If not disassembling auxiliary pump, plug all
open ports with protective caps.
3.
REMOVE AUXILIARY PUMP FROM ENGINE
COMPARTMENT.
NOTE
When removing right auxiliary pump,
cap screws and lockwashers will be
removed.
a.
Remove socket head cap screws (14) and
lockwashers (15). Discard lockwashers.
NOTE
When removing left auxiliary pump,
coupling between pumps must
remain with auxiliary vibration pump.
b.
Remove
auxiliary
pump
from
engine
compartment.
c.
Remove preformed packing (16). Discard
preformed packing.
d.
Cover exposed end of propulsion pump or
auxiliary vibration pump with plastic bag. Secure
bag with rubber band or tie wrap.
GO TO NEXT PAGE
2-567
