TM 5-3895-373-34
1.27.2
Auqer Assembly. The right and left auger
assemblies each consist of an auger drive shaft
supported by two auger drive ball bearing units. The
inboard bearing units are mounted onto the chain guard
housing, and the outboard bearing units are mounted
onto bearing mounts. Each ball bearing unit is equipped
with a remote lubrication fitting for easy access. The
auger assembly is driven by an auger drive sprocket
wheel located at the inboard end of the auger drive shaft,
inside the chain guard housing.
Five hemi auger flights and two quarter auger flights are
bolted onto each auger drive shaft. Paving width can be
increased
by
adding
bolt-on
auger
and
fender
extensions.
a.
One Foot (0.3 m) Auger and Fender
Extension: The 1 foot (0,3 m) auger and fender
extension consists of an extension fender and an auger
extension shaft with attached auger flights. The fender
extension is bolted onto the paving machine main frame.
The auger extension is bolted onto the end of the main
auger drive shaft. One hemi auger flight and one quarter
auger flight is bolted to the auger extension shaft.
1-19
