TM 5-3895-373-34
MATERIAL: 1-1/2 IN. (38,1 MM) DIA BAR STOCK, 1020 MILD STEEL
NOTES:
1.
ALL DIMENSIONS SHOWN ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
2.
TOLERANCES ARE 0.030 IN. (0, 8 MM) UNLESS OTHERWISE INDICATED.
3.
ALL MACHINED DIAMETERS TO BE CONCENTRIC i0.008 IN. (0,2 MM).
4.
MACHINED SURFACES TO BE 125 MICROINCHES UNLESS OTHERWISE INDICATED.
5.
BREAK SHARP EDGES.
Figure 19. Shaft Seal Driver Tool
C-21
