TM 5-3895-373-34
MATERIALS: 3/16 IN. (4,8 MM) THICK PLATE, 1020 MILD STEEL; 3 EA 3/16
UNC X 2 IN. HEX HEAD CAP SCREWS; 3 EA 3/16 UNC HEX NUTS
NOTES:
1.
ALL DIMENSIONS SHOWN ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
2.
TOLERANCES ARE 0.030 IN. (0,8 MM) UNLESS OTHERWISE INDICATED.
3.
MACHINED SURFACES TO BE 125 MICROINCHES UNLESS OTHERWISE INDICATED.
4.
BREAK SHARP EDGES.
Figure 15. Shaft Bearing Removal Tool
C-17
