TM 5-3895-373-34
MATERIAL: 4 IN. (101,6 MM) DIA BAR STOCK, 1020 MILD STEEL
NOTES:
1.
ALL DIMENSIONS SHOWN ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
2.
TOLERANCES ARE -0.030 IN. (0,8 MM) UNLESS OTHERWISE INDICATED.
3.
MACHINED SURFACES TO BE 125 MICROINCHES UNLESS OTHERWISE
INDICATED.
4.
BREAK SHARP EDGES.
Figure 4. 3.5 In. Diameter Driver
C-6
