TM 5-3895-373-34
MATERIAL: 3 IN. (76 MM) DIA BAR STOCK, 1020 MILD STEEL
NOTES:
1.
ALL DIMENSIONS SHOWN ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
2.
TOLERANCES ARE i0.030 IN. (0,8 MM) UNLESS OTHERWISE INDICATED.
3.
MACHINED SURFACES TO BE 125 MICROINCHES UNLESS OTHERWISE
INDICATED.
4.
BREAK SHARP EDGES.
Figure 3. 2.75 In. Diameter Driver
C-5
