2.4.3. Checking Unpacked Equipment.

b. Remove tape securing air cleaner cap assembly

SECTION III. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
58

TM 5-3895-373-20 d. Remove pressure gauges (11) from toolbox (12). Remove protective bubble wrap material from pressure gauges. e. Pressure gauges (11) shall be tagged "For Use with 780T Paving Machine only" and properly stored in the Organizational Maintenance Shop. Refer to TM 53895-373-24P, Special Tools List for gauge identification data. 2.4.3. Checking Unpacked Equipment. a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the damage on SF 364, Report of Discrepancy. b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in accordance with the instructions in DA PAM 738-750. 2.4.4. Assembly of Equipment. The paving machine is shipped assembled and ready for use. Installation of end-gates is required prior to paving. Installation of paving accessories is required prior to paving extended widths. Install the end-gates and extended-width paving accessories per instructions in TM 5-3895-373-10. 2-5

Privacy Statement
Press Release
Contact