C. INSTALL - TM-5-3895-373-20

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
542

TM 5-3895-373-20 B. CLEAN - Continued. Thread locking compound solvent can cause eye damage. Wear safety goggles/glasses when using. Avoid contact with eyes. If solvent contacts eyes, flush eyes with water and get immediate medical attention. 2. CLEAN THREADS OF HEX HEAD CAP SCREWS WITH THREAD LOCKING COMPOUND SOLVENT. WIPE DRY WITH A LINTFREE CLOTH. C. INSTALL. 1. INSTALL LIFT PUMP. a. Install preformed packing (9), elbow (8), and tube reducer (7). Rotate elbow to position shown. b. Install gasket (6). Thread locking compound can cause eye damage. Wear safety goggles/glasses when using. Avoid contact with eyes. If compound contacts eyes, flush eyes with water and get immediate medical attention. c. Apply thread locking compound to leading threads of hex head cap screws (4). d. Install fuel lift pump (1). When positioning fuel lift pump during installation, make sure pump actuator lever rides on top of engine camshaft. Install retaining plate (5) and hex head cap screw (4). Tighten cap screws to 14 lb-ft (19 N.m). GO TO NEXT PAGE 4-5

Privacy Statement
Press Release
Contact