TM 5-3895-373-20
REFERENCE INFORMATION
DCA CIRCUIT
STARTER MOTOR VOLTAGE - STE/ICE-R TEST 68
DESCRIPTION
TEST PROCEDURES
Measures the voltage present at the starter positive (B)
terminal.
1.
Set TEST SELECT switches to 68.
DCA test Pins. T and W
2.
Turn ignition switch to START position for 10 seconds
per TM 5-3895-373-10.
Measurement Range: 0 to 32 Vdc
3.
Press and release TEST button.
PRE-TEST PROCEDURES
Run confidence test per TM 9-4910-571-12&P.
4.
Observe displayed value. Displayed values are in
volts. If .9.9.9.9 is displayed, voltage is not within test
range. Expected minimum display value is 17 volts.
POSSIBLE ERROR MESSAGES
None
STARTER SOLENOID VOLTAGE - STE/ICE-R TEST 70
DESCRIPTION
TEST PROCEDURES
Measures the voltage present at the starter solenoid ’S’
terminal.
1.
Set TEST SELECT switches to 70.
DCA test Pins: S and W
2.
Turn ignition switch to START position per TM 5-
3895-373-10.
Measurement Range: 0 to 32 Vdc
3.
Press and release TEST button.
PRE-TEST PROCEDURES
Run confidence test per TM 9-4910-571-1 2&P.
4.
Observe displayed value. Displayed values are in
volts. If .9.9.9.9 is displayed, voltage is not within test
range. Expected minimum display value is 18 volts.
POSSIBLE ERROR MESSAGES
None
2-382
