TM 5-3895-373-20
REFERENCE INFORMATION
SCREED BLOWER MOTOR CIRCUIT
Refer to TM 5-3895-373-10 for engine starting and equipment operating procedures. Refer to paragraph 2.10 for
connecting and disconnecting STE/ICE-R test set to DCA.
Blower
motor
power
terminals
in
harness
receptacle are as follows:
Right Hand Main Screed - Terminal Q
Right Hand Extension Screed - Terminal N
Left Hand Main Screed - Terminal B
Left Hand Extension Screed - Terminal K
Refer to paragraph 7.21 for harness and lead
wire repair.
To avoid reverse polarity to multimeter, touch
negative probe to equipment frame and use
positive probe to check both connector terminals for
12 volt supply.
Reference electrical schematic at back
of manual for complete circuit wiring.
2-371
