TM 5-3895-373-20
REFERENCE INFORMATION
AUGER/CONVEYOR CIRCUIT
Refer to TM 5-3895-373-10 for engine starting and equipment operating procedures. Refer to paragraph 2.10 for
connecting and disconnecting STE/ICE-R test set to DCA.
This diagnostic maintenance procedure applies
to both the left hand and right hand auger/
conveyor systems. If only one side works, use
the procedure to check the side that doesnt
work. If both systems fail, check either the left
hand or right hand system.
If the left hand auger/conveyor system fails,
always check components in the left hand circuit
unless the procedure instructs you to do
otherwise. If the right hand auger/conveyor
system fails, always check components in the
right hand circuit unless the procedure instructs
you to do otherwise.
WARNING
Ensure all personnel are clear of paving
machine before engaging control handles.
Paving machine may move causing injury or
death.
NOTE
Auger/conveyor switches are located on both
screed controls boxes.
2-307