TM 5-3895-373-20
REFERENCE INFORMATION
HORN CIRCUIT
Press the reset button on the breaker if unsure
of the breaker condition.
Refer to paragraph 7.21 for harness and lead
wire repair.
Open gauge panel access door per TM 5-3895-
373-10 to gain access to circuit breakers.
Remove switch panel per paragraph 7.6 to gain
access to horn switch terminals.
After completing diagnostic checks, close gauge
panel access door(s) and right access door per
TM 5-3895-373-10. Install switch panel per
paragraph 7.6.
2-133
