TM 5-3895-373-10
Table 2-1. Preventive Maintenance Checks and Services for
Bituminous Material Paving Machine
Location
Item
Item To
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
GENERAL
NOTE
Ensure that all crew lubrication
requirements are performed on the
paving machine per LO 5-3895-373-12.
Perform WEEKLY, as well as
BEFORE, PMCS if:
a.
You are the assigned operator but
have not operated the equipment
since the last WEEKLY.
b.
You are operating the equipment
for the first time.
Levers, pins, linkages, etc., not
equipped with lubrication fittings
should operate freely and be clear of
rust. When checking fuel/oil levels,
ensure vehicle is on level surface for
accurate reading.
EXTERIOR
WARNING
Read and understand all safety precautions
and warnings before performing any
checks and services or personal injury can
result.
1
Before
Perform walk-around inspection of vehicle.
A class III leak, fuel
Check for leaks or obvious damage that
leak, or a steady stream
would require more detailed inspection.
leak of hydraulic oil is
detected
2
Before
Safety decals
Check for damage and legibility. See
and data plates
paragraph 2.25.
2-13